Laser cutting machine daily maintenance precautions
2023-09-06
Laser Cutting Machine is a kind of precision equipment, for its daily maintenance need to pay attention to the following matters: 1. Regular cleaning: Clean the exterior and interior equipment of the laser cutting machine regularly, including the cutting area, lenses, optical paths and so on. Use specific cleaning agents and soft cloth for cleaning, avoiding the use of scratching or corrosive substances.Laser Marking Machine 2. Check and replace the cutter: Check and replace the cutter of the laser cutting machine regularly to ensure the sharpness and normal working condition of the cutter. Depending on the usage and the material to be cut, it may be necessary to replace the knives periodically.Laser Rust Cleaning Machine 3. Calibrate and adjust: Regularly calibrate and adjust the laser cutting machine's focal length, gas flow, optical path and other parameters to ensure cutting effect and accuracy. You can refer to the manual of the equipment or consult professional technicians for operation. 4. Check the gas supply: Make sure the gas supply of the laser cutting machine works properly, check the gas pressure, flow rate and gas quality. Replace the gas filter and maintain the gas supply system if necessary. 5. Pay attention to heat dissipation: the laser cutting machine will generate heat when working, make sure the surrounding environment is well ventilated to avoid overheating. Consider using a heat sink or fan to reduce the temperature of the equipment.Laser Rust Remove Machine 6. Check the optical path: Regularly check and clean the optical path of the laser cutter, including key components such as lenses and mirrors. Make sure they are free of dirt, dust or damage to maintain proper transmission of the optical path and cut quality. 7. Prevent Dust Accumulation: Avoid dust and foreign matter from accumulating on critical parts of the laser cutter, such as lenses and optical path. Use a sealed cover or guard to remove dust accumulation periodically. 8. Follow safe operation: When using the laser cutting machine, always follow safe operation procedures, wear personal protective equipment, and ensure that the safety features and protective devices of the equipment are working properly.
